Description of Slag Remover
The slag remover main raw material is volcanic ash mineral, and its main component is silicate. It is processed and proportioned through advanced technology. It is mainly used for removing slag and heat preservation of molten iron and molten steel in the casting process
Advantage of Slag Remover
> Slag removal and slag retention: High-efficiency slag remover can be used in ladle, tundish and electric furnace. After being evenly spread on the molten surface by hand or spray gun, it can quickly accumulate into a slag shell that is easy to separate from the metal solution with a little agitation. The pure solution can be obtained by removing the slag shell to avoid slag inclusion in the casting and improve the quality. And it does not burst, splash, stick to the bag, or hang on the wall. If slag blocking is required, a slag-aggregating agent can be added to the ladle or furnace mouth after slag removal before casting to form a striped floating dam, which can block scattered slag, save manual slag blocking, reduce labor intensity and improve production efficiency.
> Thermal insulation coverage: The high-efficiency slag remover has low thermal conductivity, and a good thermal insulation layer formed on the surface of the molten metal can reduce the heat loss of the solution. This is an excellent thermal insulation covering agent for intermediate subcontracting or metal solutions that need to be parked for a long time.
> Environmental protection: The high-efficiency slag remover has no pollution, no penetration, and does not affect the chemical composition and mechanical properties of the casting. No smoke, dust and harmful gas pollution, can purify the environment, and civilized production.
> Dosage: The general addition amount of high-efficiency slagging agent is 1~3kg/T metal solution, which can be increased or decreased according to the size of the molten liquid, the temperature, and the impurity content of the molten metal.
> Thermal insulation coverage: The high-efficiency slag remover has low thermal conductivity, and a good thermal insulation layer formed on the surface of the molten metal can reduce the heat loss of the solution. This is an excellent thermal insulation covering agent for intermediate subcontracting or metal solutions that need to be parked for a long time.
> Environmental protection: The high-efficiency slag remover has no pollution, no penetration, and does not affect the chemical composition and mechanical properties of the casting. No smoke, dust and harmful gas pollution, can purify the environment, and civilized production.
> Dosage: The general addition amount of high-efficiency slagging agent is 1~3kg/T metal solution, which can be increased or decreased according to the size of the molten liquid, the temperature, and the impurity content of the molten metal.
> Imported new kraft paper with moisture-proof
> Leaking proof package, 25kg / bag, can be packaged as per the user's requirements.
> Stored in dry place away from moisture. One year shelf life.
Physical and Chemical Property for Casting
| Brand Properties | ZT-1G | ZT-6G | ZT-7G | DR-1G | DR-3G1 | DR 3G2 | DR 7G | TDR-2 | TGZ-9 | |
| ºC Application Limit Temp | 1680 | 1650 | 1650 | 1700 | 1,680 | 1,680 | 1680 | 1720 | 1850 | |
| Bulk Density (g/cm3) | 2.05 | 2.15 | 2.25 | 2.15 | 2.25 | 2.15 | 2.10 | 2.10 | 2.25 | |
| Granularity(mm) | 0-6 | 0-6 | 0-6 | 0-6 | 0-6 | 0-6 | 0-6 | 0-6 | 0-6 | |
| ºC Application Limit Temp | 1680 | 1650 | 1650 | 1700 | 1,680 | 1,680 | 1680 | 1720 | 1850 | |
| Bulk Density (g/cm3) | 2.05 | 2.15 | 2.25 | 2.15 | 2.25 | 2.15 | 2.10 | 2.10 | 2.25 | |
| The Line Rate(%) | 1500 ºCx3h | ±0.24 | ±0.24 | ±0.24 | ±0.24 | ±0.24 | ±0.24 | ±0.24 | ±0.24 | ±0.24 |
| Compressive strength(Mpa) | 1500ºC×2h | >38 | >38 | >38 | >38 | >38 | >38 | >38 | >38 | >38 |
| Flexural Strength(MPa) | 1500 ºCx3h | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 |
FAQ
Q:Are you trading company or manufacturer ?
A:We are factory. So you do not have to worry about quality and price, we can guarantee the best quality and the most reasonable price
Q:How long is your delivery time?
A:Generally it is 5-10 days if the goods are in stock, or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q:Do you provide samples?Is it free or extra?
A: The price of samples depending on the volume of you need.
Q: What are your terms of payment?
A:Payment<=3000USD, 100% in advance.Payment>=3000USD, 30% T/T in advance ,balance before shipment.
If you have another question, pls feel free to contact us.