HEPA Filter Mobile fume and dust remover with active carbon filter 

Features

1. Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals,
    precious materials, etc.

2. For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make
    it is a longer life,more secure and reliable.

3. There are 3 stages filtering layer with the interceptionnet. It will also increase the active carbon filter layer
     according to working conditions or clients, the filtering effeciency is very high, the active carbon filtering layer
     will reduce the peculiar smell in the air.

4. Power phase sequence instructions,  short-circuit protection for lack of phase, with shutdown protection       
     measures when too high temperature.

5.  With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature,
     wear- resistant compounded materials, without crack and damage to sparks, its life shorter than the model
     of intelligent.

6. Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by   
    pulling the handle of  the hood with the operator's will flexibly and easily and position by itself in the absence
    of external force. Depending on needs, 2m, 3m  flexible suction arm are optional.

7. Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will

     not crack after burning through by spark with longer life; the arm diameter is160mm.

Technology parameter: